Let me tell you about my old Ford truck. This 1971 Ford F-100 Ranger XLT has been in the family for 50+ years.
My grandfather bought it in East Texas in February 1971 and it's been in near-constant use since then. He used it on his small ranch to haul hay, feed, and anything else that came along. He hauled grandkids in the bed from the home place to the lake and back - back in the day when it was legal and no one thought about the safety of such practice. I spent many hours riding standing up in the bed with my elbows leaning on the top of the cab, facing the wind.
Here's a photo that he sent my Mom just after he bought it.
My grandfather bought a new truck in 1980 and sold this one to my Mother. She mostly puttered around town in it, but occasionally she and my Dad used it to haul their travel trailer back to East Texas to work their pecan orchard there. It spent many hours working the "farm" there.
When Mom passed away in 2000, I bought it from my Dad and have owned it since.
I've spent many hours repairing, restoring and improving this old truck. Please take a look at the factory specifications, as well as the maintenance that I've done and the upgrades I've added.
390 CID V-8 w/ 2 bbl Carburetor
Ford C-4 Three-Speed Automatic Transmission
Power Brakes
Power Steering
Dealer-Installed Frigidaire Aftermarket Air Conditioning
Full Eight-Foot Bed
Behind-Seat Storage
Twenty-ish Gallon Fuel Tank, Under Bed
141,000 Actual Miles
Ford Factory Maintenance Manuals – Engine & Chassis
New Paint Job (2009 – OK, that’s not really “new” anymore)
New Side Trim (though woodgrain insert has peeled off)
Tachometer
Cruise Control
Steering Stabilizer
New Headlight Harness
Kobalt In-Bed Toolbox
Bluetooth Car Stereo
Shoulder Belts
Engine Rebuilt 1999 (just before I got it) - Maybe 30,000 miles on it
Transmission Rebuilt 2002 - Maybe 20,000 miles on it
A/C Converted to R-134a
New Steering Gear
New Tie Rods and Drag Link
New King Pins
New Radius Arm Bushings
New Power Steering Pump
New Power Brake Booster
New Brake Master Cylinder
New Wheel Cylinders
New Alternator
New Starter
New Electronic Voltage Regulator
New Rear Wheel Bearings
New Radiator
New Fuel Sending Unit
New Fuel Pump
New Heater Core
New Gas Tank Filler Hose
Rebuilt Carburetor
New Plug Wires
New Exhaust System
Factory-Installed Oil Leaks in Valve Covers & Intake Manifold (grin)
Find me an old Ford that doesn’t leak oil and I’ll show you one that has NO oil in it
Wood Grain Peeled on New Side Molding
Some Lower Molding Missing
Interior Needs Work
Some Rust at Bottom of Doors
Old Fords leak oil – it’s just what they do
Old Fords are cranky when it’s cold (and their definition of “cold” often changes). You gotta learn how to tickle the accelerator to get them to start.,
This was one of the last years Ford produced trucks with the “Twin I-Beam Front Suspension”.
What does that mean?
Well, it’s fantastic on the farm because of the way the front wheels can move freely and absorb the bumps from a terraced pasture.
And it’s awful on the highway because the front wheels can move freely and constantly change the geometry of the front end. Therefore, it wanders on the highway. Every Ford truck with Twin I-Beam does that.
Once you drive it for a week or two, it becomes second nature, but you are always moving the steering wheel to keep it going in a straight line. Head for the farm and you’ll love it.
This truck originally had G78/15 tires on it. When the P-metric tires came along, the P215/75R15 was supposedly the closest thing to the original G78s. However, the speedometer reads a bit fast. I think moving up to P225/75R15s will put the speedometer in the right range and will probably look better on the truck.